|
Free Shipping For All Orders Over $99.00! (Low $12.98 Shipping Charge for Orders Less than $99.00)
|
| Parts |
Popular Falcon Mark IV Grill Parts |
Price |
|
 Sorry, we do not stock or sell this cook grid.
One-piece, porcelain coated wire cook grid. It is an exact-fit cook grid made years ago for these models. It is no longer manufactured. Only one of these cook grids is needed per grill. The dimensions of this one piece, porcelain coated steel rod cook grid is 19 7/8 inches by 13 1/8 inches. (Y0032) [v]
|
|
|
 We are sold out of the cast iron grids for the Falcon Mark 4 grill. And it has been discontinued by the manufacturer.
Cook Grid Set. The Falcon was well-regarded for its heavy, v-grooved, cast iron cook grids. These are replica cast iron cook grid set that duplicate the heavy, v-groove design of the original grids. The set includes two individual cook grid halves measuring 10 by 13 inches.
|
|
|
Sorry, we are sold out of this rock grate and cannot supply.
Steel rock grate for the Mark IV and 430 models. Size is 11 1/2 by 17 1/4. [n]
|
|
|
Oval-Shaped Cast Iron Burner with ONE venturi tube going straight down the post. One Knob to turn the gas on. Select the burner with the correct venturi length from the two choices below.
|
|
 Sorry, we do not stock or sell this part.Cast Iron Oval Burner. Single knob to turn the gas on and only one tube going down the post to the valve. Venturi adjusts from 3 3/4 to 5 inches. In different model years, the length of the venturi from the burner to the valve was different lengths - either 4 inches or 7 inches. The only way to know the length of the venturi is to take the burner out of your grill and measure the tube. This burner, with either length venturi, is the same price. 52.95
|
|
|
 Sorry, we do not stock or sell this part.Cast Iron Oval Burner. Single knob to turn the gas on and only one tube going down the post to the valve. Venturi adjusts from 5 1/2 to 7 inches. In different model years, the length of the venturi from the burner to the valve was different lengths - either 4 inches or 7 inches. The only way to know the length of the venturi is to take the burner out of your grill and measure the tube. This burner, with either length venturi, is the same price.
|
|
|
Dual Burner with Two POST Venturi Tubes. Burner with Venturi Tubes that Go Straight down the Post is listed immediately below. If you have burner with two tubes that curve to the front, read on.
|
|
 We are sold out of the Falcon 215 burner and cannot supply. We have no substitutes. The manufacturer of this burner discontinued production some time ago and our inventory is completely sold out. There are no plans for it to be made again.
Dual Cast Iron Oval Burner - Two Post Controls. This burner has two venturi tubes going straight down. We have found the venturis to always be 6 1/2 to 7 inches long. We ship this burner with two adjustable venturis that adjust from 5 1/2 to 7 inches long. We do not ship 'flexible' venturis. The venturis we sell for this burner telescope up and down.
|
|
|
Dual Burner with Two Upfront Venturi Tubes that Curve to the Front. Falcon used two styles of burners for the Front Control Units. Please read details below.
|
|
 We are sold out of the Falcon 215 burner and cannot supply. We have no substitutes. The manufacturer of this burner discontinued production some time ago and our inventory is completely sold out. There are no plans for it to be made again.
Dual Cast Iron Oval Burner with two long upfront venturi tubes. The Falcon Mark 4 and 430 dual oval burner was 14 1/4 inches across. The tubes were 15 inches long measured in straight line from center of burner to end of air shutter. We have dual burner and venturis in stock.
|
|
|
 Sorry, we sold out of this burner and cannot supply. We have no substitutes to offer.
Dual Stainless Steel H Burner with Upfront Venturi Tubes. There were a limited number of Falcon Mark IV grills made with model numbers that included '430' in the model number. The original burner in those units was a stainless H burner with upfront venturi tubes. We have an exact replica burner for those units. The burner is approximately 15 1/2 inches wide. Measuring in the venturi tubes, there are 4 1/2 inches long from center hole to end of air shutter. We have this burner assembly in stock. (105-734-02). (4-cr-811)
|
|
|
Sorry, we do not stock or sell.
Single Valve for Propane Grill - Control Knob on the Post - Single Venturi Tube from Burner to the Valve. Once this is established, check the length of your burner venturi. We can supply valves for burners with 7 inch venturi tubes. Valves are shipped with the proper orifice. This valve ships as valve only. Sorry, it is not come with the locking nut and we have no locking nuts to supply. Does not include control knob. If you need knob, please order below. (V24-Propane)
|
|
|
Sorry, we do not stock or sell.
Single Valve for Natural Gas Grill - Control Knob on the Post - Single Venturi Tube from Burner to the Valve. Once this is established, check the length of your burner venturi. We can supply valves for burners with 7 inch venturi tubes. Valves are shipped with the proper orifice. This valve ships as valve only. Sorry, it is not come with the locking nut and we have no locking nuts to supply. Does not include control knob. If you need knob, please order below. (V25-Natural)
|
|
|
 Sorry, we do not stock or sell.
The L-shaped bracket is used in the post of Falcon grills to mount the valve - to hold the valve in the post. It is the same as the originally designed bracket when the Falcon grills were made. Has a nut and bolt to secure it to the back of the post - the valve is secured in placed on the L-shaped part.
|
|
|
 Single Control Knob for Single Valve. Same knob is used for the dual, post control valve. Old Part #10472-37. (K4/00500)
|
$6.95
Each
|
|
 While Supplies Last. These high quality ceramic briquettes are made in the U.S.A. and are the choice of many grill manufacturers. Ducane 'original' ceramic briquettes specially made for us by Ducane's original briquette manufacturer. We special offer them as our choice for replacement grill briquettes. Ceramic briquettes, each approximately 2 inches square, flat on the bottom and forming a four-sided pyramid shape on top to absorb and burn up the grease. By ordering here, you will receive a quantity of 70 individual ceramic briquettes.
|
$38.50
for 70 briquettes
|
| Dual Valves |
Unfortunately, we do not have a source for Falcon Dual Valves and cannot supply dual valves for this unit. |
Dual Valves |
| Warming Rack |
Sorry, we are not able to provide warming racks. |
Warming Rack |
| Front Handle |
Sorry, we are not able to provide redwood front handle. |
Front Handle |
| Whole Grills, Covers & Rotisseries |
Sorry, we have no covers, rotisseries, or whole Falcon grills to supply. They have been out of business for some time and we have no referring dealers or phone numbers for these items. |
Whole Grills, Covers & Rotisseries |
Falcon Posts, Carts, and Bases | | The Falcon company that made the Mark V and Mark IV models went out of business over thirty years ago. Since that time, there has been a limited supply of posts, carts, and bases available. After they went out of business, two companies started to manufacture and supply posts for Falcon grill customers. Now, both of them are sold out of all Falcon posts and have discontinued making and offering them. We, too, are sold out of all Falcon posts and have none to supply, no substitutes to supply, and no alternative sources for them to suggest. Sorry. |
|
|
Sorry, we are completely sold out of this post and have no more to supply. The only suppliers we know for this post are now sold out and have stopped making them. We have no posts to supply, no alternatives for the post, and no place to direct customers to find this post.
3 inch diameter, 42 inch tall post made for inground installation for Falcon grills that take 3 inch diameter post. The post is sold as 'post only' - no valves, knobs, tubing, screws, nuts or bolts. It is painted black. We do not have any 'short' 3 inch diameter Falcon posts for carts or bases.
|
|
|
Sorry, this post is no longer available. We are out and have no other source or supplier for Falcon short post.
Short post for Falcon grills with single knob. This is a 4 inch diameter by 24 inch long post that fits most models of Falcon barbecues with single knob to turn on the gas. The post is sold as 'post only' - no valves, knobs, tubing, screws, nuts or bolts. It is painted black.
|
|
|
Sorry, this post is no longer available. We are out and have no other source or supplier for Falcon short post.
Short post for Falcon grills with dual knobs. This is a 4 inch diameter by 24 inch long post that fits most models of Falcon barbecues with dual knobs (dual controls) to on the the gas. The post is sold as 'post only' - no valves, knobs, tubing, screws, nuts or bolts. It is painted black.
|
|
| Bases & Carts |
Sorry, we no bases or carts. Nor do we have any parts for bases or carts - no wheels, axles, brackets, hubcaps. All the parts we have for Falcon grills are listed on our site. |
Bases & Carts |
| Castings & Carts |
Sorry, we have no castings, or cart parts or wheels for Falcon grills. |
Castings & Carts |
